Leading 10 usual forklift crashes ， forklift procedure should pay attention to these issues ！.
Leading 10 usual forklift crashes ， forklift procedure should pay attention to these issues ！.
Blog Article
Don't undervalue the forklift at the office. If the operation is not good, there will certainly be serious crashes in minutes, and there are numerous crashes including forklifts.
Case 1: The forklift cargo blocked the chauffeur's sight, and the person in front might not be found, causing a moving mishap.
Instance 2: In order to keep the equilibrium of the forklift when raising heavy items, the employees used their body weight as the counterweight, which virtually caused casualties.
Case 3: The width of the forklift cargo exceeds the permitted width of the course and hangs on the roadside rack, which practically causes an mishap.
Instance 4: Forklift is speeding up and rolls over during a turn.
Instance 5: The forklift chauffeur did not observe the pedestrian, and the pedestrian did not notice the forklift.
Instance 6: The forklift lifts the personnel illegally, the forklift driver does not use the seat belt, the forklift lifter drops and the motorist is squashed when the forklift rolls over.
Instance 7: The forklift chauffeur did not put on a seat belt and fell from the vehicle when it rolled over and was squashed.
Forklift operation need to pay attention to these issues ：.
Start.
1. Before beginning, observe the surroundings, and after validating that there are no obstacles that impede the safety of driving, honk the horn initially and then begin.
2. For lorries with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress ( atmospheric pressure) scale should be risk-free before starting.
3. When the forklift begins with a load, the chauffeur ought to initially confirm that the lots is secure and reliable.
4. The beginning has to be sluggish and constant.
Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground ought to be kept at 300mm-400mm, and the mast needs to be tilted in reverse. .
2. Do not lift the fork too high when driving. When going into and leaving the work site or while driving, be careful that there will certainly be no obstacles in the sky. When the tons is traveling, the fork has to not be raised too high, which will affect the stability of the forklift. .
3. After discharging, the fork needs to be reduced to the regular driving position before driving. .
4. When transforming, if there are pedestrians or vehicles close by, the driving signal must be released first. High-speed doglegs are restricted. High-speed doglegs will certainly create the automobile to shed side security and topple. .
5. When the forklift is downhill, it is strictly prohibited to turn off the fire and slide, and it is forbidden to brake unexpectedly while driving with tons unless there are unique conditions.
6. When the forklift is running, it needs to obey the website traffic rules in the manufacturing facility and should maintain a particular safety range from the lorry ahead. .
7. When the forklift is running, the load should remain in the lowest placement that does not prevent the driving, and the gantry ought to be effectively slanted back. The tons will not be raised except when piling or packing. .
8. The height of the lots need to not block the chauffeur's sight. In special scenarios, when the product affects the forward vision, drive at a low rate when turning around.
9. It is forbidden to activate the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory location is 5 km/h, and it has to drive securely at a low speed when entering the manufacturing workshop location. .
11. When the forklift is lifted, lifted or driven, it is restricted for employees to base on the fork to hold Electric Forklift Truck for Warehouse items and play a stabilizing duty. .
12. If issues are found, they will certainly be fixed and reported in a timely fashion, and they will certainly never run with ailments or conceal them.
loading and dumping.
1. When fork-loading products, the distance in between the two forks should be readjusted as needed to make the load of both forks balanced and not manipulated, and one side of the product should protest the rack. .
2. It is prohibited to work with a solitary fork or use a fork top or draw. In special scenarios, safety indication should be established to remind bordering pedestrians. .
3. In the process of filling and discharging products, the forklift needs to be braked with the brake. .
4. The speed of the vehicle must be slow and stable. Take care not to roll the wheels on the dunnage, so as not to extend the rolled things and hurt individuals. .
5. When making use of a fork to fork the goods, the fork must be as deep as possible under the lots, and it ought to be noted that the fork idea need to not touch other items or things. The tons needs to be supported with very little back tilt of the gantry to make sure that the lots does not glide backwards. The pole can be slanted forward slightly when the lots is lowered to allow for simple positioning of the tons and extraction of the forks. .
6. It is forbidden to fork products at broadband and collide with tough objects with the fork head. .
7. When the forklift is functioning, it is prohibited for people to loaf the fork, so regarding prevent the collapse of the goods and injure people. .
8. Straining is prohibited, and it is forbidden to utilize forks to raise personnel to take part in high-altitude operations to avoid high-altitude dropping accidents. .
9. It is not permitted to utilize the brake inertia to slip, place, round or roll items. .
10. It is not permitted to utilize forks to select, turn pallet unload.
Leaving .
1. It is forbidden to leave the forklift when the things on the fork impend. Before leaving the forklift, you should unload the goods or reduced the fork framework.
2. Draw the hand brake handle to dead or depress the hand brake button.
3. The engine is switched off and the power is cut off. (Except for special conditions, such as the vehicle driver does not leave the car's view and does not exceed 1 minute).
4. Remove the trick. .
Forklift Operation Precautions.
1. Prior to and after the forklift operation, the look needs to be examined, and fuel, lubing oil and air conditioning water need to be included.
2. Check the security performance of starting, running and braking.
3. Check whether the lights and horn signals are full and reliable.
4. Throughout the procedure of the forklift, inspect whether the stress and temperature level are typical.
5. After the forklift is running, the outside leakage ought to likewise be checked and the seals need to be changed in time.
Forklift Safety Operation Specifications.
1. You need to check before leaving the car;.
2. When you encounter a person before you during driving, you ought to send out a signal at a distance of 5 m;.
3. The driving rate in the factory does not exceed 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m above the ground;.
5. The turning ought to not be too sharp to avoid the tendency of " cost-free turning";.
6. Adding and down the slope should be slow-moving and uniform, and no activating the slope is permitted.
7. Do not drive throughout the gradient. When the gradient is above 10%, the vehicle must be driven backwards when declining;.
8. When the forklift personnel lug the goods and move forward, if they encounter big or heavy products and most likely to the motorist's view, they need to take the turning around workout
.
The "Eight Prohibitions" ought to be adhered to in the procedure.
1. Single fork operation is not allowed.
2. It is not permitted to lift the goods for long distance driving.
3. It is not enabled to pick up the goods by turning over the pallet with the fork.
4. It is not allowed to straight shovel chemicals, flammables and various Stand-on Electric Pallet Stacker other harmful chemicals with forks.
5. It is not enabled to make use of inertia force to grab the goods.
6. It is not allowed to use stopping force to exile round or easy-to-roll things.
7. It is not enabled to bring individuals to work with the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is increased.
8. Do not drive side to side on slopes
.
Car park is not permitted under the following problems.
1. Contours, slim roads, railway crossings;.
2. Sections with a longitudinal slope higher than 5%.
3. When there is an obstacle on one side of the roadway, the opposite side of the area with the same length as the obstacle must be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844